Westell Technologies 2110 Manual de usuario Pagina 8

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 35
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 7
030-300196 Rev. A 6
WireS
p
eed Dual Connect Modem
User Guide
Table 5. Ethernet Pinouts
Pinout Description
1 Rx+
2 Rx-
3 Tx+
4,5,7,8 Not Used
6 Tx-
5.6 Modem Installations
This section explains the procedures for installing Westell’s WireSpeed Dual Connect modem via USB connections
or via 10/100 Base-T/Ethernet connections.
Note: This product supports simultaneous use of Ethernet and USB ports. They may be connected
simultaneously if you are using two distinct IP addresses. Please wait until you have received
notification from your Service Provider that your DSL line has been activated before installing
your modem.
Note: If you are using a Westell ADSL modem in conjunction with a router, refer to the router manufacturer’s instructions for proper installation
and configuration.
5.6.1 Modem Installation via USB
Figure 2. Modem Connection via USB
Refer to Figure 2.
1. Place the modem on a flat surface that is near the PC.
2. Connect the power supply cord to the power connector marked
~
on the rear panel of the modem. Plug the
other end of the power supply cord into an AC wall socket.
12V
Vista de pagina 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 34 35

Comentarios a estos manuales

Sin comentarios